Bestobell

Bestobell

Steam Traps, Inverted Bucket Traps, Capsule Traps, Line Strainers, Condensate Return Pumps, Moisture Separators, Pressure Regulators, Vacuum Breakers

Delta Element Steam Traps

DMR6 Series 
Designed to provide sufficient capacity for wall radiators and space heaters up to 150,000 btu/hr.
M3A/GM3 Series 
Designed for fast start-up and modulating discharge on services up to 30 psig.
GM3/GM6 Series 
Designed for fast start-up and continuous modulating discharge on large process and heating applications up to 30 psi (GM3) and 70 psi (GM6)
M6A/GM6 Series 
Designed for low condensate capacity needs of process and heating applications with operating pressures up to 70 psig.
M10/GM10 Series 
Designed to handle the varying loads of process applications with operating pressures up to 120 psig.
M16/GM16 Series 
Designed to handle the varying loads of process applications with operating pressures up to 200 psig.
M25/GM25 Series 
Developed to handle the varying loads and pressure typical of process and heating applications with operating pressures up to 320 psig.
M40/M64/M100 Series 
A series of heavy-duty steam traps in 1-1/2″ & 2″ sizes designed specially for high pressure, high flow process applications with operating pressures up to 320 psig.
Magnum Series 
A versatile line of high capacity steam traps, the Magnum can be supplied with up to 18 bimetallic elements for hot condensate flows as high as 149,000 pounds per hour.
DM6 & DM12 Series 
A line of lightweight, yet rugged, steam traps for services with operating pressure up to 150 psig.
DS12 Series 
A lightweight steam trap for plan applications requiring sealed Stainless Steel construction for tracing services with operating pressures up to 150 psig.
DM25 Series 
For use on steam main dripleg and critical tracing service with operating pressures up to 320 psig.
DM40/DM64/DM100/D100F/DM160/DM320 Series 
Designed for process applications with operating pressures up to 2000 psi.
M22/TM22 Series 
For tracing services with operating pressures up to 300 psi.
TS22 Series 
For services with operating pressures up to 300 psi.
DM10E Series 
Commonly used as an automatic drain for freeze-proof protection of condensate return systems and manifolds, and on tracer systems where maximum use of BUT’s from condensate is desired.

Universal Traps

Universal Connector Bestobell has introduced the universal mount, bimetallic steam trap for plant applications requiring standardized connections.The universal mounting connections allow trap use on any manufacture’s universal mount.
Features & Benefits


Single blade element – offers long-term, trouble-free service because it’s not prone to dirt build up
Stainless Steel internals – highly resistant to fatigue and corrosion and completely renewable
Universal mount – universal mounting connections allow trap use on any manufacturer’s universal mount.
Modulating discharge – automatically adjusts to operating pressure and load, overcoming problems associated with cyclic discharge
Continuous air and CO2 venting – maximizes heat transfer while minimizing corrosion
Fast start-up capabilities – due to high cold discharge capabilities.

Sanitary Steam Traps

BTCS Series 
The BTCS Series is a thermostatic steam trap designed specifically for use in clean steam systems demanding that sanitary conditions be maintained.
DTCS2T0 Series 
A 1/2″ 316L stainless steel thermodynamic disc trap with optional 20Ra finish that is compact with a lightweight design and Tri-Clamp® end connections.

Inverted Bucket Traps

IB18H Series 
Horizontal type bucket traps featuring a side inlet and side outlet. Ideal for general steam service.
IB18S Series 
Horizontal inverted bucket traps which is ideal for general condensate removal service and feature a built-in strainer, heavy-duty cast iron body, and stainless steel bucket for longer term operation and reliability.
IB18V Series 
Vertical style inverted bucket trap ideal for general condensate removal service and features a heavy-duty cast iron body and stainless steel bucket for long-term operation and reliability.
IB21V & IB41V Series 
Inverted bucket trap ideal for high pressure services. For pressures up to 300 psig (20,7 bar) select the IB21V Series and for pressures up to 600 psig (41,5 bar) select the IB41V Series.

Float & Thermostatic Traps

PT Series 
A group of float & thermostatic traps for use in discharging air and condensate, while preventing steam from entering return piping on steam heating systems and seat process equipment.
FTH-10 Series 
Designed to freely remove large quantities of condensate from systems where dirt and oil are not excessive.

Thermodynamic Disc Traps

DTCS210 Series 
A 1/2″ 316L stainless steel thermodynamic disc trap with optional 20Ra finish that is compact with a lightweight design and Tri-Clamp® end connections.
DT711 Series 
The D711 Series is a line of compact, lightweight, thermodynamic style disc traps designed to efficiently discharge condensate on applications with working pressures up to 711 psi. Available with or without an integral strainer.

Pressure Regulators & Strainers

Y-Type Line Strainers 
Protects your steam system against the damage to valves, traps and other equipment from foreign matter such as dirt, scale or welding particles in the pipeline.
PR300 Series 
A hard seated pressure reducing and regulating valve suitable for steam applications with supply pressures up to 300 psig (20,7 bar).

Thermostatic Capsule Traps

GSM17 Series 
All stainless steel construction and a built-in strainer for use in or around harsh environments. For capacities up to 1200 lbs/hr at up to 250 psi (17 bar), DP.
GCM17 Series 
A forged carbon steel body and all stainless steel internals with a built-in strainer and check valve for use in or around harsh environments. For capacities up to 2200 lbs/hr at up to 250 psi (17 bar) DP.

Condensate Recovery Products

POPS Bestobell Steam’s original high flow condensate return pump that saves energy, steam, water and costly water treatment chemicals by transferring high temperature condensate to the return main. Featuring a cast iron tank (other alloys available) with 316SS internal parts. Produced in 1″ x 1″, 1.5″ x 1.5″, 2″ x 2″, and 3″ x 2″ sizes.
Features & Benefits


Totally self operated: no electrical power source is required; connects to existing steam, air or gas supply
Ideal for use in hazardous or wet environments; suitable for NEMA 4, 7 & 9 locations
Avoids cavitation and pump seal problems: transfers high temperature (200°F +) condensate or other liquids from a low point, low pressure or vacuum space to an area of higher pressure or elevation with no cavitation or pump seal problems
Virtually maintenance free: requires no lubrication; no rotating seals that can leak or motors than can burn out

Ultrasonic Leak Detection System

 Test Equipment > Steam Tector 2 Ultrasonic Leak Detection System


SteamTector2 Bestobell Steam’s SteamTector 2 offers high sensitivity and great sound quality in a compact package designed for one hand operation. Included in a hard shell case is the instrument, flexible wave guide, headset, touch probe and battery.For industrial steam trap testing nothing can compare! The contact sensor is a proprietary design that delivers a clear signal which is surprisingly free of hiss or electrical “noise”. The SteamTector 2 will accurately test steam traps and valves for internal leaks. It will also allow you to accurately record the ultrasonic sound signatures of bearing and other moving machinery to gauge the extent of wear, and predict failure BEFORE it occurs.
Features & Benefits


Highly sensitive
Small and simple to use
Runs on a 9v battery
Designed for use in areas of low to moderate background noise